1982-1993 Mustang GT Registry - www.mustanggt.org
Dedicated to the documentation and preservation of
1982-1993 Mustang GT's
since 1994!!
Home | About Us | REGISTER your 1982-1993 Mustang GT!! | GT Registry Statistics | Info By Year | Reference Gallery
Forums | Classifieds | Interactive Decoders | Production Numbers | GT Articles | Factory Literature | Info Needed | Donations
This message board and web site has been made possible through donations from: List of Contributors THANK YOU!!!!   
1982-1993 Mustang GT Registry Message Board  

Welcome to the 1982-1993 Mustang GT Registry Message Board!!

We're glad you're here! You are currently viewing our boards as a guest which gives you limited access to view lists of topics, our GT Registry articles & information and access some of our other FREE features. By joining our community, you will have access to read and post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   1982-1993 Mustang GT Registry Message Board > Restoration and Originality > Exterior and Interior Restoration
Register FAQ Members List Referrals Calendar JavaChat Mark Forums Read
Info NEEDED!!REFERENCE GALLERY!!REGISTER your 1982-1993 Mustang GT!!GT Registry StatsInfo By YearAbout Us

Exterior and Interior Restoration Want your GT to look brand-new again? Ask your questions here - restoration tips and techniques, where to find original parts and correct finishes, etc.

Reply
 
Thread Tools Display Modes
Old 01-14-2014, 11:16 PM   #1
Ironhorsey
Junior Member
 
Join Date: Jun 2013
Posts: 4
Default Converting to manual windows possible?

I hope this isn't consider blasphemy, but I would like to convert the power windows in my '89 convertible to manual.
Did the factory offer manual mechanisms? In the convertibles too?

Drew
Ironhorsey is offline   Reply With Quote
Old 01-15-2014, 04:11 AM   #2
Augie88GT
Senior Member
 
Join Date: Jan 2013
Location: Staten Island, NY
Posts: 236
Default

Of course it is possible. Anything is possible.

You probably have to change some of the guts inside the door. Also. the understanding I have is that, in many cars, the glass is longer with manual windows. They cut the glass to accommodate power windows. So, you are probably going to need new (longer) glass. I don't know if this is also true for Mustangs.

But why would you want to do this? Most people go the other way. I wish my first Mustang had power windows. My second one does, and I love it.
__________________
Currently own: 1988 Mustang GT hatchback, black/red, 5.0 V8, 5-speed, original owner, 14,000 original miles
Previously owned: 1980 Mustang Turbo coupe (notchback), grey/black, 2.3 turbo, 4-speed, my first car
Augie88GT is offline   Reply With Quote
Old 01-24-2014, 11:54 PM   #3
fb93
2010 Donating Member
 
fb93's Avatar
 
Join Date: May 2010
Location: Pennsylvania
Posts: 325
Default

I dont believe ive ever seen a vert with manual windows. Not that i can recall.

The power window and manual window armrests are a different length. Manuals are shorter so the crank can rotate freely. You can cut a hole in the power door panels for the crank, but there will be holes visible in the panel, so you would need manual panels. And you cant use your existing power panels/armrests with a crank because the crank will hit the armrest. You need a manual panel and the armrest to use the cranks. You will have to find a manual armrest base on top of that. I have not had much luck in finding those things, but the pads are everywhere. Go figure. As for the windows being different, they are. Those with door mounted side mirrors used a different glass than the window mounted mirrors. I cant remember if its at the front by the mirrors, or at the top of the door that theyre different.

The doors themselves for a vert are different than a hatch/notch, they are cut differently. I think even the t-top doors are different. You could modify them im sure, but i couldnt tell you how. So that makes three different doors. Going to manual windows would also mean losing the power locks as well since on a vert that is all on the same switch.

You would be better off finding a manual door and just use that. It will have everything already in place. Otherwise you will have to figure out where to drill the doors for everything, you will need the regulator assembly of course as thats different than the power, the crank, and a couple rivets. So, yea, if youre dead set on going to manuals, find a complete door. The downside to that is if you have to midoify anything, AND you lose the door tag.

And one more thing. If you have a grey interior, pick the new door panels carefully as i have a couple variances in the greys. Some are lighter than they should be, some darker, some in between. Chances are you will have to redye part of your interior so it all matches.

So the question is, do you REALLY want to go manual? IMO, thats a lot of work. But yes, its possible.

Last edited by fb93; 01-24-2014 at 11:58 PM..
fb93 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

| Home | Info by Year | Register A GT | Statistics | Resources |
| Classifieds |


All times are GMT -5. The time now is 01:18 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.