1982-1993 Mustang GT Registry - www.mustanggt.org
Dedicated to the documentation and preservation of
1982-1993 Mustang GT's
since 1994!!
Home | About Us | REGISTER your 1982-1993 Mustang GT!! | GT Registry Statistics | Info By Year | Reference Gallery
Forums | Classifieds | Interactive Decoders | Production Numbers | GT Articles | Factory Literature | Info Needed | Donations
This message board and web site has been made possible through donations from: List of Contributors THANK YOU!!!!   
1982-1993 Mustang GT Registry Message Board  

Welcome to the 1982-1993 Mustang GT Registry Message Board!!

We're glad you're here! You are currently viewing our boards as a guest which gives you limited access to view lists of topics, our GT Registry articles & information and access some of our other FREE features. By joining our community, you will have access to read and post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   1982-1993 Mustang GT Registry Message Board > General Tech > Maintenance, Troubleshooting and Diagnosis
Register FAQ Members List Referrals Calendar JavaChat Mark Forums Read
Info NEEDED!!REFERENCE GALLERY!!REGISTER your 1982-1993 Mustang GT!!GT Registry StatsInfo By YearAbout Us

Maintenance, Troubleshooting and Diagnosis Need help? Having troubles with your GT? Need some maintenance tips? Ask your questions here.

Reply
 
Thread Tools Display Modes
Old 02-02-2005, 03:58 PM   #1
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

I

Last edited by Riley; 06-03-2014 at 01:00 PM..
Riley is offline   Reply With Quote
Old 02-02-2005, 05:25 PM   #2
FoxChassis
Senior Member
 
FoxChassis's Avatar
 
Join Date: Mar 2001
Location: Willow Spring, NC
Posts: 4,546
Post

Never heard of a "Cobra package" on an '83 Mustang GT. Need more information on exactly what this "package" consists of, and pictures, etc. before we can give you advice.
__________________
'83 Mustang GT, '84 LTD LX, '86 Mustang GT, '87 Thunderbird Turbocoupe, '95 Mustang GT convertible
FoxChassis is offline   Reply With Quote
Old 02-02-2005, 05:53 PM   #3
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

It has Cobra parts,Cobra Emblems factory roll bar,302 HO 5.0. Sorry I can't provide you with more info, and I don't have pictures at the moment.
Riley is offline   Reply With Quote
Old 02-02-2005, 06:05 PM   #4
FoxChassis
Senior Member
 
FoxChassis's Avatar
 
Join Date: Mar 2001
Location: Willow Spring, NC
Posts: 4,546
Post

Sounds like a Predator Mustang which was built by Tom Solomon (not Ford, so it's not "factory")...

http://www.graphic-express.com/z-orlando_hayward.htm
http://www.graphic-express.com/ford_...itor_cobra.htm



[ 02-02-2005, 03:05 PM: Message edited by: FoxChassis ]
FoxChassis is offline   Reply With Quote
Old 02-02-2005, 06:39 PM   #5
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

That's not it. Because this "was" bought direct from the Ford house. Only one owner.
Riley is offline   Reply With Quote
Old 02-02-2005, 06:49 PM   #6
FoxChassis
Senior Member
 
FoxChassis's Avatar
 
Join Date: Mar 2001
Location: Willow Spring, NC
Posts: 4,546
Post

Tom Solomon was heavily involved with Shelby Mustangs and Cobras, so in 1983 he designed and developed a Shelby Equipped Cobra Mustang based on the 1983 fox chassis.

He showed the model to Ford and they loved it. Solomon wanted to call the car "The Cobra" but Ford would not agree because it owned the Cobra name. So Solomon officially named the car "The Predator Mustang", and Ford gave him the O.K. to produce the cars and sell them through selected dealers through out the country.

The Predator was made from 1983-1986. There were two factory locations; Dallas, Texas and Topeka, Kansas. The premier of the Predator was in 1983. Ford was so impressed by it that sources say that it inspired the design of the 1984 anniversary mustang. There were only 8 cars produced in 1983. Five of them were white hatch-backs with 1965 Shelby stripes, which read, "G.T. 350", 2 read "G.T. 302", and 1 read "G.T. 302H." Each car was equipped with a Cobra engine dress up kit with its unique small oval Cobra air cleaner, a Monte Carlo bar, a four point roll cage, a walnut shifter knob, 14 x 6.5 aluminum Shelby 8 spoke wheels with 3 bar knock off spinners, SVO competition suspension, functional hood scoop, competition hood pins & cables and 3:27 axle ratios. There are two aluminum G.T. 350 or G.T. 302 badges on each vehicle; one is located at the rear of the vehicle on the hatch, off set to the right. All of these cars were assembled in Dallas, Texas.

The 1984 Predators are equipped the same as the 83 models except for the following modifications, a 1965 Shelby Mustang hood scoop was installed and made functional. All the stripes and aluminum badgers were modified to say, "G.T. 302." Some cars had Kamei ground effects. This was the premier of the ultra rare Predator Convertible & "R or Race Models." The R Model could be ordered with any engine modifications, a fiber glass hood and with one of two axle ratios; 3:73 or 4:10. Two types of Predators were offered this year and they were: a standard Predator, which had the word, "Predator" on the valve covers, steering wheel, spinners and on the grill, and the other is a "Predator Cobra" or a Predator with the Cobra package, which had the word "Cobra" on the valve cover, the air cleaner and on the fenders under the Cobra snake. The R-Model came in both types. The color choice was the same as the Mustang G.T. There were approximately 125-130 cars built in 1984.

The 1985 models has the same equipment as the 84 models, but a new wheel was added to remind one of the magnum 500 wheel. It was a 4 spoke Enki Wheel. The R-Models were continued and came standard with a fiber glass hood, under drive pulleys, LeMans stripes, 140 MPH speedometer, a side stripe that said "G.T. 302 R" and 3:73 or 4:10 axle ratios.
Other SVO or Motor-Sport parts could be ordered with the car such as Cam, harness seat belts, etc., which was installed only after the car was titled. Some dealers offered an American Racing wheel and a BBS type wheel, also a Walnut 3 spoke steering wheel was a Dealer option. There were 135-140 1985 models built.

There were no R models in 1986. Some cars have no LeMans stripes and some did, but they all have side stripes. A few of them have stripes like a 67 G.T. 500 "Super Snake". There were only 17-23 cars built that year by Solomon America. All of the cars built from 1983-86 have a Solomon America Modification I.D. plate, which is located on the inner fender on the driverís side under the hood. These tags are very similar to the Shelby Mustang tags and are often used to distinguish a real Predator from a fake one.

So as one can see, this car could be obtained as radical as the buyer wanted it. It was, and still is highly sought after. The Predator was the first Shelby-equipped Mustang based on the fox chassis and has been followed by many others trying to keep the Shelby Legend alive!!!

This car really has the air of a Shelby Mustang, and was created in memory of the Shelby. From 83-86, this was the most lethal late model Mustang that one could buy, and was copied by some. So, we feel that it was only just, for this car to keep the Legend and tradition alive, even though it does not carry the Shelby name because it was definitely inspired by the Shelby Mustang!
FoxChassis is offline   Reply With Quote
Old 02-02-2005, 06:51 PM   #7
FoxChassis
Senior Member
 
FoxChassis's Avatar
 
Join Date: Mar 2001
Location: Willow Spring, NC
Posts: 4,546
Post

FYI: that picture above is of an '84 Predator Mustang, so an '83 Predator Mustang is not going to look like that.
FoxChassis is offline   Reply With Quote
Old 02-02-2005, 07:46 PM   #8
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

So what does this mean?
Riley is offline   Reply With Quote
Old 02-02-2005, 08:18 PM   #9
EddieLX
Senior Member
 
EddieLX's Avatar
 
Join Date: May 2003
Location: New Jersey
Posts: 1,872
Post

This means that car is great looking!! The Predator Mustang, I have never heard of it. Post up the phone # so I can buy it!
EddieLX is offline   Reply With Quote
Old 02-02-2005, 08:39 PM   #10
gt82
Senior Member
 
Join Date: Sep 2004
Location: Manchester Connecticut
Posts: 708
Post

Quote:
Originally posted by Riley:
So what does this mean?
it means if you truely have a predator mustang manufactured in 83, restore it and keep it in a vault since there were only 8 produced...and if your car is actually one of the 8 you have a gold mine on your hands....and reading through the link provided by fox there weren't alot produced in any of the 4 years so no matter what if it is actually a predator it's worth some bucks
gt82 is offline   Reply With Quote
Old 02-02-2005, 11:13 PM   #11
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

All of this sounds exactly like my car except for one thing. My car is Black with gold acces. Everything that has been said is exactly my car. PLease advise.
Riley is offline   Reply With Quote
Old 02-02-2005, 11:36 PM   #12
gt82
Senior Member
 
Join Date: Sep 2004
Location: Manchester Connecticut
Posts: 708
Post

looking at the links supplied by foxchassis it doesn't say if black was available in 83 it only states 5 were white....in the second link there is a pic of a black with gold stripe but the year isn't identified so you could very well have one of these or a good copy....i would get your title and post the vin in the decoding section...also you should check the car's buck tag and post that also and check the rear of the car for the aluminum ID plate...there is a good chance since you live in the start where they were all produced that you do have an authentic predator but take some pics get the buck tag info and vin and let some of the knowlagable people here check into it for you....and contact the number listed at the bottom of the first link from fox
gt82 is offline   Reply With Quote
Old 02-03-2005, 12:02 AM   #13
Riley
Junior Member
 
Join Date: Feb 2005
Location: Texas
Posts: 12
Post

T

Last edited by Riley; 06-03-2014 at 01:01 PM..
Riley is offline   Reply With Quote
Old 02-03-2005, 05:09 AM   #14
gt82
Senior Member
 
Join Date: Sep 2004
Location: Manchester Connecticut
Posts: 708
Post

buck tag is a small 2x3 inch or so metal tag usually rivited to the radiator support near the radiator hold down and has build info specific to that car...the aluminum id plate is on the read deck lid/hatch lid as per foxchassis' link specific to the predator's
gt82 is offline   Reply With Quote
Old 02-03-2005, 08:41 AM   #15
Bill_Laird's86GT
Senior Member
 
Bill_Laird's86GT's Avatar
 
Join Date: Mar 2001
Location: Wendell NC
Posts: 3,872
Post

If you go to the decoding forum, it has a picture on the page of the buck tag (red). This should give you an idea of what you are looking for on the radiator support.


Bill
Bill_Laird's86GT is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

| Home | Info by Year | Register A GT | Statistics | Resources |
| Classifieds |


All times are GMT -5. The time now is 01:45 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.