|
||
Home
|
About Us
|
REGISTER your 1982-1993 Mustang GT!!
|
GT Registry Statistics
|
Info By Year
|
Reference Gallery
Forums | Classifieds | Interactive Decoders | Production Numbers | GT Articles | Factory Literature | Info Needed | Donations |
||
This message board and web site has been made possible through donations from:
List of Contributors
THANK YOU!!!! ![]() |
![]() |
Welcome to the 1982-1993 Mustang GT Registry Message Board!! We're glad you're here! You are currently viewing our boards as a guest which gives you limited access to view lists of topics, our GT Registry articles & information and access some of our other FREE features. By joining our community, you will have access to read and post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact support. |
|
Info NEEDED!! | REFERENCE GALLERY!! | REGISTER your 1982-1993 Mustang GT!! | GT Registry Stats | Info By Year | About Us |
Modifications Changes from the factory stock setup - performance and appearance. What to buy next? What works & what doesn't? |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
|
![]() Hello everyone.
I recently brought the UPR rear Coilover kit for my 1988 GT and was wondering has anyone completed the install. Why? I need to know are the springs (I have the .5 inch lowering springs) still retained when you convert to coilover. The type I have is below. Here is the pick. https://lmr.com/item/UPR-2006114175/...10-175lb-79-04
__________________
'88 Gray Mustang GT (185,000 miles) Mods: Trickflow Top-end Kit - 24lb Injectors - 76mm MAF conversion Kit - 75mm Accufab TB - Aeromotive 340 Stealth Fuel Pump - Mishimoto aluminum radiator and Dual Fan shroud kit w/temp controller - Tremec 3550 Trans - BBK Ceramic coated Long Tube Headers - Cobra SVE 5 Lug (Moser 31 Spine Axles) 4-Wheel Disc Conversion - Maximum Motorsports Caster/Camber plates - Ford Racing Front/Rear Lowering Springs - KYB AGX struts and shocks - UPR Upper & Lower Rear Control Arms - Eibach Anti-Roll Front/Rear Sway Bar Kit - Auburn Diff - - 3.73 rearend gears. Last edited by 88GTHO; 07-31-2019 at 12:15 PM.. Reason: more info on the springs |
![]() |
![]() |
![]() |
#2 |
Junior Member
|
![]() I'm guessing you've figured this out by now... But to answer your question, (I think I understood it correctly) no, the factory style spring is removed when installing coil overs...
|
![]() |
![]() |
![]() |
#3 |
Member
|
![]() Qikgts,
Yes, I have, but thank you regardless.
__________________
'88 Gray Mustang GT (185,000 miles) Mods: Trickflow Top-end Kit - 24lb Injectors - 76mm MAF conversion Kit - 75mm Accufab TB - Aeromotive 340 Stealth Fuel Pump - Mishimoto aluminum radiator and Dual Fan shroud kit w/temp controller - Tremec 3550 Trans - BBK Ceramic coated Long Tube Headers - Cobra SVE 5 Lug (Moser 31 Spine Axles) 4-Wheel Disc Conversion - Maximum Motorsports Caster/Camber plates - Ford Racing Front/Rear Lowering Springs - KYB AGX struts and shocks - UPR Upper & Lower Rear Control Arms - Eibach Anti-Roll Front/Rear Sway Bar Kit - Auburn Diff - - 3.73 rearend gears. |
![]() |
![]() |
![]() |
#4 |
Junior Member
|
![]() ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
| Home |
Info by Year |
Register A GT |
Statistics |
Resources |
| Classifieds | |
|