1982-1993 Mustang GT Registry - www.mustanggt.org
Dedicated to the documentation and preservation of
1982-1993 Mustang GT's
since 1994!!
Home | About Us | REGISTER your 1982-1993 Mustang GT!! | GT Registry Statistics | Info By Year | Reference Gallery
Forums | Classifieds | Interactive Decoders | Production Numbers | GT Articles | Factory Literature | Info Needed | Donations
This message board and web site has been made possible through donations from: List of Contributors THANK YOU!!!!   
1982-1993 Mustang GT Registry Message Board  

Welcome to the 1982-1993 Mustang GT Registry Message Board!!

We're glad you're here! You are currently viewing our boards as a guest which gives you limited access to view lists of topics, our GT Registry articles & information and access some of our other FREE features. By joining our community, you will have access to read and post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact support.

Go Back   1982-1993 Mustang GT Registry Message Board > Our Archives > FAQ
Register FAQ Members List Referrals Calendar JavaChat Mark Forums Read
Info NEEDED!!REFERENCE GALLERY!!REGISTER your 1982-1993 Mustang GT!!GT Registry StatsInfo By YearAbout Us

FAQ Collection of frequently asked questions.

 
 
Thread Tools Display Modes
Old 06-16-2003, 08:21 PM   #1
Adam
Guest
 
Posts: n/a
Post

Hey i'm sure this question has been asked quite a bit, but I've got a 1987 Mustang GT and I was wondering how to figure out if I've got the 3.08 or the 2.72 gears. Thanks guys.

[ 01-13-2004, 08:10 PM: Message edited by: FoxChassis ]
 
Old 06-16-2003, 08:46 PM   #2
FoxChassis
Senior Member
 
FoxChassis's Avatar
 
Join Date: Mar 2001
Location: Willow Spring, NC
Posts: 4,546
Post

Four ways, and the first two will only tell you what was original equipment, not necessarily what's in there now (if it was changed)...

1. Look under AX on the Vehicle Certification Label that is affixed to the rear face of the left (driver) door.

M = 2.73:1 w/ Traction-Lok
Z = 3.08:1 w/ Traction-Lok
E = 3.27:1 w/ Traction-Lok
R = 3.45:1 w/ Traction-Lok (GT Turbo only)

2. Look at the Axle Tag which is attached to the differential cover, under one of the bolts. The numbers on the lower left of the tag should be self-explanantory.

3. Jack the rear of the vehicle up, support it with jackstands, and chock the front tires. Mark the driveshaft and one tire. Put the transmission in neutral. Spin the tire ONE full revolution and count how many times the driveshaft rotates (including partial). The number of driveshaft rotations is the ratio.

4. Jack the rear of the vehicle up, support it with jackstands, and chock the front tires. Remove the differential housing cover. Count the number of teeth on the ring and pinions gears. Divide the ring gear's tooth-count by the pinion gear's tooth-count.

[ 01-13-2004, 08:17 PM: Message edited by: FoxChassis ]
__________________
'83 Mustang GT, '84 LTD LX, '86 Mustang GT, '87 Thunderbird Turbocoupe, '95 Mustang GT convertible
FoxChassis is offline  
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

| Home | Info by Year | Register A GT | Statistics | Resources |
| Classifieds |


All times are GMT -5. The time now is 04:18 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.